Installation Manual

Use WEEB-DPF to bond
solar modules to module
mounting brackets.
Use WEEB-11.5 to bond
module mounting brackets
to Power Beam rail.
Use WEEB-WMC to bond
ballast pans to Power Beam
rail.
Use WEEBL-8.0 to connect system
to equipment ground conductor.
SYSTEM OVERVIEW
Wiley Electronics LLC. 2006-2010



All Rights Reserved
Important Notes:
The NEC section 690.43 states, "Exposed non-current carrying 1.
metal parts of module frames, equipment, and conductor
enclosures shall be grounded in accordance with 250.134 or
250.136(A) regardless of voltage."
Use general purpose anti-seize compound on fastener threads 2.
when installing WEEBs.
WEEBs are intended for SINGLE USE ONLY. Functionality will 3.
not be guaranteed if reused.