Installation Manual

OK
Not enough clearance!
WEEB COMPATIBILITY
OK
The WEEB family of products can be used to bond anodized aluminum,
galvanized steel, steel and other electrically conductive metal structures.
Wiley Electronics LLC. 2006-2010



All Rights Reserved
Standard Top Down Clamps
The WEEBs used for bonding the PV modules to the mounting rails are
compatible with various cross-sections of module frames. The following
are examples of module frames that are compatible. Notice that the WEEB
teeth are positioned completely under the edge of the module frame.
OK
The following is an example of a module frame that is incompatible with the
WEEB-DPF. Lipped solar modules mounted with inverted U-shaped clamps do
not have enough clearance to fit the WEEB-DPF.
X