Instructions / Assembly

ASSEMBLY INSTRUCTIONS

double signature glider

330-893-4212 • www.wildridge.com

LCC404

Step 3

Assemble the base as shown with (8) 5/16" x 3" lag bolts and (8)

5/16" washers through holes provided in base pieces (D) and into

pilot holes in cross members (E).

Note: Turn block out.

Step 4

Using (4) 3/8" x 2 1/2" machine bolts (4) 3/8" locknuts and (8) 3/8"

washers, attach the bearing glider brackets to each side of base.

Slide washer on bolt then through 3/8"

hole provided add another

washer before hanging

glider bracket on bolt. Hang glider bracket

with curve away from base at bottom then fasten 3/8" locknut.

Step 5

Using (4) 3/8" x 2 1/2" bolts and (4) 3/8" nuts and (8) 3/8" washers

attach the chair legs to the glider brackets. Your glider is now

complete.

Thank you for purchasing from Wildridge.

Note: The holes at the top of

both the bases are for the

glider brackets in Step 4 .