Instructions / Assembly
ASSEMBLY INSTRUCTIONS
classic
adirondack glider
330-893-4212 • www.wildridge.com
LCC208
© 2020
Step 7
Set the seat assembly over the glider base assembly, making sure
the straight part of the glider base assembly is facing towards the
front and the angled part of the base is turned towards the back.
Fasten the bottom of the glider hanger (to each of the legs) by
s
liding (1) 3/8" washer onto (1) 3/8" x 2 1/4" machine bolt. Push the
bolt through hole from the inside to the outside. Now, add another
3/8" washer, then fasten (1) 3/8" lock nut tightly on to the bolt.
Straight
Side Of
Base
Should
Face
Towards
The Front
Step 8
Your glider is complete. Enjoy!
Thank you for purchasing from Wildridge.
Step 6
Next, to mount a glider bracket onto the glider base, slide (1) 3/8"
washer onto (1) 3/8" x 2 1/2" machine bolt. Push the bolt through
the pre-drilled hole in the base from the inside to the outside. Now,
add another 3/8" washer, then hang a glider bracket onto the bolt
with the curve facing away from the glider base, as shown. Now
fasten (1) 3/8" lock nut tightly on to the bolt. Repeat on the other 3
sides.
3/8" x 2 1/2" Bolt
3/8" Washer
Glider Bracket
With Curve
Facing Away
From Glider
Base
3/8"
Lock Nut