Instructions / Assembly

ASSEMBLY INSTRUCTIONS

classic

adirondack glider

330-893-4212 • www.wildridge.com

LCC208

Step 5

Position the glider base (E) and the base support brackets (G), as shown. Fasten

the glider base to the base supports with (4) 3" screws, 2 on each side. Repeat on

the other end with the other glider base.

Step 3

Set the back/

seat assembly

on its side as

shown, and

fasten the right

arm assembly

(D) using (4)

2 3/4" bolts in

the legs and (1)

2" bolt in the

arm, as shown.

Put ange nuts

onto the end of

the bolts, but

do not tighten

completely.

Repeat on the

other side with

the left arm

assembly. Stand

the glider up

on all fours and

adjust the chair

so it sits evenly,

tighten the

ange nuts.

Step 4

Fasten the front slat on the seat to the legs as shown

with (2) 2" screws through the pre-drilled holes.

Repeat on other side.

(2) 2 3/4" Bolts

(1) 2" Bolt