Installation & Assembly

ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
4.4) Align and fasten roll slat to bed rails using flat head screw and tighten with screw driver (not included).
PAGE 4 OF 8
4.2) Align and fasten short guardrail to trestle bar and right upper bed end using nut and long bolt. DO NOT
TIGHTEN AT THIS STEP.
3.1) Insert wood dowel to left and right upper bed end.
3.2) Align and fasten upper bed rail and upper front bed rail to left and right upper bed end using nut and long bolt.
DO NOT TIGHTEN AT THIS STEP.
3.3) Align and fasten long guardrail to left and right upper bed end using nut and long bolt. THEN TIGHTEN ALL
THE BOLTS AT STEP 3.2 & 3.3 WITH ALLEN WRENCH.
4.1) Insert wood dowel to the end of short guardrail.
4.3) Align and fasten trestle bar to upper front bed rail using short bolt. THEN TIGHTEN ALL THE BOLTS AT
STEP 4.2 & 4.3 WITH ALLEN WRENCH.