CHEST ASSEMBLY INSTRUCTIONS PAGE 1 OF 3
ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1 . Remove hardware from box and sort by size. 2 . Please check to see that all hardware and parts are present prior to start of assembly. 3 . Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. Warning ! 1 . Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2 . This product is for home use only and not intended for commercial establishment.
ANTI - TIPPING KIT PARTS IDENTIFICATION HARDWARE IDENTIFICATION A. CHEST 1 SET This tip restraint must be attached to a wall stud using long screw enclosed. STEP 1 Attach a bracket securely to the back top rail of the chest using short screw provided, through the smaller hole. 1. SHORT SCREW 1 PC. 2. LONG SCREW 1 PC. 3. CABLE TIE 1 PC. 4. L BRACKET 2 PCS. STEP 2 Locate the other bracket on the wall over a wall stud and two inches below the mounting bracket secured to the back of chest.
