ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. A Warning ! 1. Don't attempt to repair or modify parts that are broken or defective . Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
ASSEMBLY INSTRUCTION ASSEMBLY Do not fully tighten all bolts until assembly is 3 0): 1P08 complete. This will help all parts to assemble 5 PCS properly. 7 1 STEP Align and attach the upper base frame to the left and right side ends by using the bolt (3), washer (5) and tighten with the Allen wrench. {B) Align and attach the lower base frame to the left and right side ends by using the bolt (3), washer (5) and tighten with the Allen wrench.
ASSEMBLY INSTRUCTION STEP 3: Align and attach the guardrail to the upper base frame by using the bolt (1), washer (5) and tighten Allen wrench. Then align and attach the guardrail to the left and right side ends by using the bolt (3), Allen wrench. washer (5), and tighten with the STEP 4:Align and attach the ladder to the upper bed by using the bolt (4), washer (6), and tighten with the Allen wrench.
ASSEMBLY INSTRUCTION Safety Warnings 1.Follow the information on the warnings appearing on the upper bunk end structure and on the carton . Do not remove waning label from bed. 2. Always use the recommended size mattress or mattress support,or both,to help prevent the likelihood of entrapment or falls. 3.Surface of mattress must be at least 5 in(127mm). below the upper edge of guardrails . 4.Do not allow children under 6 years of age to use the upper bunk. 5.
