Assembly Instructions

PAGE 6 OF 7
The length and width of the bunk mattress are as f
ollow:
Length Width Thickness
Upper bunk
74"
-
75"
37 1/2"
-
38 1/2"
6" Maximum
Lower bunk 74" - 75" 37 1/2”-38 1/2” 6" maximum
Ensure thickness of mattress does not exceed 6” and
there must be at least 5” from mattress sleeping
SIZE OF MATTRESS
surface to top edge of guardrail.
SAFETY WARNING
1. Follow the information on the warnings appearing
on the upper bunk end structure and on the
carton. Do not remove the warning label from bed.
2. Always use the recommended size mattress or matt
ress support or both to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 in. (127
mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to us
e the upper bunk.
5. Prohibit more than one person on upper bunk.
8. Always use the ladder for entering and leaving t
he upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
6. Periodically check and ensure that the guardrail
, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
10. Use of a night light may provide added safety precaution for a child using upper bunk.
11. Always use guardrails on both long sides of the
upper bunk. If the bunk bed will be placed next
to the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
12. The use of water or sleep flotation mattress is prohibited.
13. Keep these instructions for future reference.
STRANGULATION HAZARD:
14. Never attach or hang items to any part of the bunk bed that are not designed for use with the bed
for example, but not limited to hooks, belts, and j
ump ropes.
REPLACEMENT PARTS:
(B1-B4)
ASSEMBLY INSTRUCTIONS
Replacement parts, including additional guardrails may be obtained from any Furniture Dealer.