ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. A Warning ! 1. Don't attempt to repair modify parts that are broken or defective . Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
ASSEMBLY INSTRUCTION NOTE; THE LADDER CAN BE ASSEMBLED ON EITHER SIDE STEP STEP Page 5 of 11
ASSEMBLY INSTRUCTION AN WARNING TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM ENTRAPMENT OR FALLS Never allow a child under 6 years on upper bunk. .Use only mattress which is in width and length on upper bunk (twin size). .Ensure thickness of mattress does not exceed 6" and mattress surface is at least 5 inches below upper edge of guardrails. .Use guardrails on both sides of upper bunk. Prohibit horseplay on or under bed(s). .Prohibit more than one person on upper bunk. .
ASSEMBLY INSTRUCTION SAFETY WARNING 1. Follow the information on the warning attached to the upper bunk end structure and on the carton. Do not remove this label. 2. Always use the recommended size mattress or mattress support or both to help prevent the likelihood of entrapment or falls. 3. Surface of mattress must be at least five inches (127mm) below the upper edge of guardrails. 4. Do not allow children less than six years of age to use the upper bunk, 5. Prohibit more than one person on upper bunk. 6.
