User's Manual

METTLER TOLEDO WILDCAT Scale Technical Manual
(12/00) 3-4
Factory Default Settings
STEP DEFAULT DESCRIPTION
F1.1 *, ** Calibration units – No default
GEO * Gravity adjust – No default
F1.2 0 Skip calibration
F1.3 0 Normal weight display
F1.4 0** Programming mode access disabled
F2.1 0** Alternative units = none (Unit switch disabled)
F2.2 0** Auto Backlight disable
F2.3 1 Tare enable
F2.4 1** Push button zero enabled, 2% range
F2.5 1** Auto zero maintenance enabled
within 0.5d window
F2.6 1 Motion sensitivity +/- 1d
F2.7 0 No Filtering
F2.8 0 Sleep mode disable
F2.9 1** Auto zero capture at powerup range of +/- 2%
F3.1 9600 Serial output baud rate
F3.2 7 Data bits
F3.3 2 Stop bits
F3.4 2 Even parity
F3.5 2 Print format = single line gross-tare-net
F3.6 1 Checksum enable
F3.7 0 No printed legend for gross weight field
*These setup steps are not reset during a Reset to Factory Defaults.
**Initial factory settings for WILDCAT scales with country code 000.
F1.1 = 1 F2.2 = 1 F2.5 = 2
F1.4 = 1 F2.4 = 2 F2.9 = 2
F2.1 = 2
Table 3-1