User's Manual

METTLER TOLEDO WILDCAT Scale Technical Manual
(12/00) 3-2
Key Functions
Should you need to reconfigure the WILDCAT scale, the following keys are used in the
programming mode to configure the program blocks.
ZERO Back up to the previous step.
TARE Moves the data entry position one digit to the left.
FUNCTION Increments the numeric data entry digit and/or allows the
programmer to view the next display in a selection list.
PRINT Accepts/terminates a data entry.
Entering the Programming
Mode
To access the program blocks, the CAL jumper must be in place shorting the two pins
on the Controller PCB. Refer to Figure 3-2 for the CAL position.
To configure the program blocks, you must enter the programming mode by pressing
and releasing the PRINT and ZERO keys simultaneously.
Figure 3-2
CAL
0
T
C
F
J-5
J-4