Instruction manual

wildappetite.co.nz
PROBLEM The heat indicator light goes on and off.
CAUSE This is an automatic thermostat light.
SOLUTION The light will stay on until the oven has reached the desired
temperature setting.
PROBLEM Top of pizza burns.
CAUSE Temperature of oven is too high.
SOLUTION When checking the pizza, if you think the top is cooking quicker
than the bottom, turn the oven setting back to 1, leaving the pizza to
continue cooking without the thermostat light on. Alternatively leave
the lid open for a couple of minutes so you can watch the pizza finish
cooking.
PROBLEM Bottom of pizza burns.
CAUSE Temperature of oven is too high.
SOLUTION Make sure the oven has been pre-heated on setting 1. When the oven
light goes out, allow a couple of minutes for the stone to rest before
adding the pizza. When cooking additional pizzas one after the other
it is best to leave the lid open for a few minutes in between cooking
pizzas with the setting back to 1.
PROBLEM Dirty Stone Base.
CAUSE Moisture on bottom of base.
SOLUTION Don’t worry if stone marks. The greater the marks, the better the
flavour it gives the pizza. Just scrape off any excess material with
the metal paddles.
Trouble Shooting Guide