User Manual

2
7. Carefullyliftthebagandsetthebagintothedispenser.
8. Rest tubing on top of the bag..
9. Replacethetopcover.
10. Dispensebeveragefromfaucetuntildarkerproductstartstoappear(~5seconds).
11. TheTCCNteadispenserisnowreadytoservetea.
3. Pullofftheshipping 
cap that covers the
spout on the bag.
4. PlacetheQCDnextto
the spout.
5. SlideQCDsideways,
over the bag spout.
 QCDsnapsinplace.
6. PushQCDplungerinto
bag spout until plunger
 topisushwithtopof
 QCD.A“click”willbe
 heardwhenitisfully
inserted.
LOAD PRODUCT
1.PlaceateaconcentratebagonthecounternexttotheTCCNteadispenser.
2. RemovethetopcoverfromtheTCCNteadispenserandpulloutthehosewiththeQCD
bag connector.
c. Graspingthebagconnector(asshowninLoadProduct,step6),pushtheslidingprobeallthewayintothe
 bagspout.A“click”willbeheardwhenitisfullyinserted.
d. Oncethecleaningsolutionboxisconnected,openthedispensingvalveonthedispenserandrunliquid
through the valve until the clear cleaner liquid is detected. The dispensing line is now clean.
e. Disengagethebagconnectorbysnappingtheconnectorprobeoutandremovetheconnectorfromthespout.
f. AttachateaconcentrateBIB.
g. Openthedispensingvalveondispenser.Allowliquidtoowuntilonlyteaows,noclearliquid.
WATER PRESSURE AND MIXING VALVE
Thetamper-proofindexmark(onthe’adjustmentknob-to-body’threadsofthepressureregulator)isafactorycalibrat-
ed,pressuresetting.Thepressureregulatorshouldrarelybechanged.Primary
taste/brixadjustmentsshouldbedoneviathemixingvalvebyturningtherod
andtastingthenishedproduct.98%ofavoradjustmentsshouldbedonein
this manner.
The purpose of the regulator is to provide uniform water pressure so the venturi-
stylemixingdevicecanproduceastableanduniformblendofconcentrateand
waterand,alsotoprotectthehydraulicsofthedispensingunitfrom“linepres-
sure”.Itisnottheprimaryadjustmentforthebrixlevel.Fromourtesting,ithas
beenshownthatexactPSIonthegagedoesnotdirectlycorrelatetoabrixlevel
from unit to unit and from installation location to installation location.
Secondarily,iftheprimaryadjustmentdoesn’tprovidetheidealbrixlevel,call
CurtisCareforinstructionsonhowtoadjusttheregulator.Asarule,verylittle
taste adjustment is achieved via the pressure regulator.
CAUTION: Do Not Exceed 25 psi (static). Equipmentfailureorleakagewill
result.