User Manual

SETUP STEPS (Continued)

4 Turnonthemainpowerswitch(bottomtoggleswitch,behindthebrewer).Theheatingtankwillstarttoll.Whenthewater

levelinthetankrisestothecorrectvolume,theheatingelementwillenergizeautomatically.Thiseliminatesthepossibilityof

elementburnoutcausedbyanemptytank

5. Intheinitialwarm-upoftheheatingtank,itwillrequire20to30minutestoreachoperatingtemperature(204°F).Thisisindi-

catedwhenReadytoBrewappearsontheLCDscreen.

6. Primethesweetenerpumptopreparetheunitforbrewing.Holdacupunderthedilutionspouttocatchliquidsweetener.Press

thePRIMEbutton.Holddownthebuttonuntilsweetenerowsfromthedilutionspout.Releasethebutton.Thesweetenerpump

isnowprimed.Performthisattheinitialteabrewersetupandthereafter,eachtimetheBIBsweetenerisreplaced.

7. Runonefullbrewcycle,topurgethewaterlinesandvalvesofair.Fivesecondsofdilutionwateratthebeginningofeachbrew

cycle is a normal function. This is a default of the system.

8. Theunitisnowreadytobrewtea.

SWEETENER SCHEMATIC LAYOUT