User Manual

Steps to Programming
Your Curtis Generation 3 cappuccino dispenser is Factory Pre‑Set for Optimum Performance. Programming for all models is identical except
where noted.
EnteringtheProgramingMenus
PressandholdSTOP/WASHforaboutten[10]seconds.Displaywill
readProgram Menus,(SeeIllustration).
ManualDispense(FactoryDefault)¹
Pressor>togotoManualDispenseSelect.
PresstogotoManualDispenseSelectStation.
Choosethestationandpress,thedisplaywillreadSaving Complete!
Toselectanotherstationformanualdispense,presstogotoManual
DispenseSelectStationorpress>tocontinuetothenextmenu.
DispenseByTime²
ThenextscreenisDispenseByTime<Select>.Presstoselectastation.SelectthestationandthescreenwillreadTo Begin Press Push.
Pressdesireddispensebutton.HotwaterwillstarttodispenseandscreenwilldisplayTo Finish Press Push. When Push ispressed,timewillbe
savedandyouwillexitbacktoDispensebyTimescreen.Continuewithadditionalselectionsorpress>tocontinuetothenextmenu.
Temperature(Factorysetat190°F–ColdCappuccinoUnitsSetat96ºF)
PressandscreenwillshowTankTemperature.Temperatureisprogrammablefrom80°Fto204°Fin2-degreeincrements.Press<or>togoup
ordownindegrees.Selectdesiredtemperatureandthentoset.Press>tocontinuetothenextmenu.
Powder%Ratio(Factorysetat60%)³
PressandthescreenwilldisplayPowder%RatioSelectStation.Pressdesiredstation.Powderratioisprogrammablefrom0%(HotWater)to
100%,in5%increments.Press<or >toincreaseordecreaseratioandthenpresstoset.Press>tocontinuetothenextmenu.
Therangeofpowder-to-waterratiohasbeenexpanded.Valvesshould notbeeldadjustedtochangeproductstrength.
Productstrengthadjustmentsshouldbedonethroughprogrammingonthefrontpanelonly.
ServiceCall(Phonenumber)
Presstodisplaynumberandpresschangenumberor >tomoveplacesandEXtoexitwhencompleteThisnumberwillbedisplayedduring
aHeatingsystemSENSORERRORoraWATERERROR.Press>tocontinuetothenextmenu.
Banner Name
Presstodisplayletters,presstochangelettersor >tomoveplacesandEXtoexitwhencomplete.
Thisfeatureallowsupto14letterstobeprogrammedforcompanynameorregionalname.ProgrammingallblanksdisablesBannerName.If
programmed,BannerNameisdisplayedevery5sec.onandoff.Press>tocontinuetothenextmenu.
Model Select
Presstoselect, <or>toselectdesiredmodel(PC-1,2,3,4,5).Presstosetandexitprogrammode.
Exit
Presstoselect,exitsprogrammodeandreturnsunittooperation.
PROGRAMMING CONTROL BUTTONS
3
UniqueSettings:ModelPCGT3with
PresetDispense
¹ManualDispense(SettoOFF)
 Pressor>togotoManualDispenseSelect.
 PresstogotoManualDispenseSelectStation.
 Choosethestationandpress,thedisplaywillreadSaving Complete!
 Toselectanotherstationformanualdispense,presstogotoManual
 DispenseSelectStationorpress>tocontinuetothenextmenu.
²DispenseByTime
 FactoryDefault:AllLARGEsetat25seconds.AllMEDIUMsetat16seconds.AllSMALLsetat12seconds
DispenseByTime<Select>.Presstoselectastation.SelectthestationandthescreenwillreadTo Begin Press Push.Pressdesired
 dispensebutton.HotwaterwillstarttodispenseandscreenwilldisplayTo Finish Press Push. When Push ispressed,timewillbesavedand
 youwillexitbacktoDispensebyTimescreen.Continuewithadditionalselectionsorpress>tocontinuetothenextmenu.
³Powder%Ratio(Factorysetat45%)
 PressandthescreenwilldisplayPowder%RatioSelectStation.Pressdesiredstation.Powderratioisprogrammablefrom0%(HotWater)
 to100%,in5%increments.Press<or >toincreaseordecreaseratioandthenpresstoset.Press>tocontinuetothenextmenu.
ModelSelectisNotaMenuItemonPCGT3withPresetDispense