Owner's manual

Display Timers

< - - Select - - >

The G3/Gold Cup Series Brewing System is Factory Pre-Set for Optimum Performance.

After connection to water and power; the rear toggle switch must be on. You will hear a beep sound, indicating power is available to the controller.

The control displays . Press ON/OFF button and the screen will display . After three seconds, is displayed.

Water will ll the tank (approximately 2-3 minutes depending on water ow rate). When the proper level is reached will appear on the

screen. It takes approximately 20 minutes to reach setpoint temperature of 200°F.

Control will display when temperature reaches the setpoint (200°F). Unit is now ready to brew.

WILBUR CURTIS

CURTIS CURTIS

FILLING

CURTIS

HEATING

CURTIS

READY

PROGRAM

MENUS

Allprogrammingselectionsareperformedwiththethreecenter

buttons.

Thesymbolsbelowthebuttonsare:

ScrollLEFT

¤ SELECTIONorENTERtosavenewparameter

  ScrollRIGHT

IMPORTANTNOTE:

GEM INTELLIFRESH