Service manual
12
Sweetener Schematic Layout
DAILY
1. Wipe any spills, dust or debris from the exterior surfaces with a damp cloth. The
outside surfaces of the brewer should be cleaned with stainless steel polish only, to
prevent scratches.
2. Clean the sprayhead and domed area around the sprayhead with a mild detergent
and warm water solution. Scrub well to remove residue. Rinse with and clear water.
Dry with clean cloth.
3. Remove the plastic brewcone and wash with a detergent solution or put through a
dishwasher.
4. Wash the beverage container.
a. Clean container and top cover with a detergent solution.
b. Remove the faucet assembly. Unscrew the handle assembly from the
faucet. Clean the faucet shank with a gauge glass brush (circular bristle)
by pushing the brush through the shank.
c. Dry and assemble parts.
IMPORTANT: Clean out
the screen, within the
brewcone, to maintain
the ow of brewed
tea. Neglecting this screen will
eventually cause the brewcone to
overow, spilling hot liquid over the
unit.
CAUTION: DO NOT
use undiluted bleach or
chlorine.
Cleaning The Brewer
CAUTION: Never
remove faucet when
container is full. Drain
container rst.