Manual

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal ET and Pascal ET/IS 49
GB
The next selection ask if a passive or active loop is required (with 24 V supply for the loop).
Figure 54 – mA loop generation setup
6.3.2.6 Channel 4 – mathematic functions
Channel four has an additional setting named CALC. This function enables to display on channel
n. 4 a value, result of the combination of the values displayed in channel 1 and 2. To access, press
on the display of channel 4, then Channel on the bottom bar and then assign.
Figure 55 – Channel 4 assignment