Instruction Manual

6 Commissioning, operation

72 WIKA Operating Instruction, Pascal 100 and Pascal 100/IS

6.6.6 Offset On – Offset Off

OFFSET ON – OFFSET OFF is used to restar the measurement on a specific channel

Press OFFSET ON to restart: zero will be displayed and OFFSET OFF will appear. Press to come

back to the previous value.

OFS indicates that the OFFSET is ON.

Figure 85 – Channel with OFFSET enabled

6.6.7 Inc. Dec – Dec. Dec

If channel is set up for pressure or temperature measurements in the CHANNEL menu the

functions INC.DEC. e DEC.DEC. are displayed. These functions allow to increment/decrement the

number of the displayed digits

6.6.8 Chg. Out

CHG.OUT allows to change a signal coming out from an Output card.

Press CHG. OUT to display a keyboard to select the value of the signals within the limits specified

during the assignment (clarly indicated under “min” e “Max” on the left side).

Figure 86 – Generation / simulation value modifing