Instruction Manual

6 Commissioning, operation
30 WIKA Operating Instruction, Pascal 100 and Pascal 100/IS
GB
6.4 User Interface
The Pascal 100 or Pascal 100/IS calibrator has a wide display with touch screen through which it is
possible to set up the instrument.
The following picture is a typical display of the Pascal 100 or Pascal 100/IS.
The top portion represents a status bar where are indicated:
■ Number of calibration report saved in memory
■ Power supply
■ Ambient temperature
■ Barometric pressure
■ Relative humidity
■ Battery charge status
■ Data Logger status
■ Date
■ Time
Figure 13 – Typical display of Pascal 100 or Pascal 100/IS
In the central part four software channels are available for selection and configuration according to
the user requirement.
In the above screen, the instrument is set up for generating the current and to display it in the
software channel 2. The other software channels are not assigned.
At the bottom part a dynamic menu is available, that changes according to the context.