Instruction Manual

6 Commissioning, operation

WIKA Operating Instruction, Model Pascal 100 and Pascal 100/IS 17

6 Commissioning, operation

6.1 Commissioning

6.1.1 Instrument Overview

1 Connectors for external P transducer 10 Hand pump (vacuum/21 bar)

2 Pressure modules 11 Pneumatic distribution

3 IN electrical/temperature modules 12 Fine adjustment

4 OUT electrical/temperature modules 13 Connector RS-232

5 Power ON 14 Connector for battery charger

6 Power OFF 15 Battery

7 Contrast + 16 Environmental Parameter Connector

8 Contrast – 17 Loop power supply – 24 V d.c.

9 Back light OFF (Lamp)

6.1.2 Functional Modules

The functional modules can be classified according to their assignments:



■ Electrical and temperature signals measurement

■ Pressure measurement, (2 different modules, up to 4 internal pressure sensors and 2

connectors for external pressure sensor)

■ Electrical and temperature signals generation/simulation

■ Pressure generation and regulation

■ Environmental parameters measurement

Many different configurations are available according to the specific requirements of the user.