Owner manual

11178035 12/2010 GB/D/F/E

Hand Spindle Pump

CPP1000-M/-L

WIKA Operating Instructions Hand Spindle Pump16

6. Mounting instruction for shut-o valve for test connec-

tion and ne adjustment valve

The mounting instruction describes the subse-

quent mounting of the shut-o valve for test

connection (Order No. 11208384) or of the ne

adjustment valve (Order No. 11248351). The

valves can be mounted at the side of the back

ange in exchange for the blind plugs which are

installed as standard.

The following combinations are possible for the individual pump versions.

CPP1000-M

Shut-o valve for test

connection

Fine adjustment valve

1 with 0

0 with 1

1 with 1

2 with 0

CPP1000-L

Shut-o valve for test

connection

Fine adjustment valve

1 with installed as standard

0 with installed as standard

If only one instrument (reference gauge or test item) with large volume is mounted on

the CPP1000-M, only one shut-o valve for test connection is needed. If both gauges

(reference and test item) have large volumes, the usage of two shut-o valves is

recommended.

When 2 shut-o valves are used, it is not possible to mount a ne adjustment valve.