User Manual

Operating Instructions Temperature Indicating Controller CF1H
V 1.2
•
01/2007 - 75 -
<Auxiliary function setting mode 2>
Character Item Initial Data
Scaling high limit setting 1370 °C
Scaling low limit setting −200 °C
Decimal point place selection No decimal point
PV filter time constant 0.0 seconds
Main output high limit setting 100 %
Main output low limit setting 0 %
Main ON/OFF action hysteresis 1.0 °C
Cooling action mode selection Air cooling
Cooling output high limit 100%
Cooling output low limit 0%
Cooling ON/OFF action hysteresis 1.0°C
Alarm 1 action Energized/Deenergized
: Energized
Alarm 2 action Energized/Deenergized
: Energized
Alarm 1 hysteresis setting 1.0 °C
Alarm 2 hysteresis setting 1.0 °C
Alarm 1 delayed timer setting 0 seconds
Alarm 2 delayed timer setting 0 seconds
External setting high limit 400 °C
External setting low limit 0 °C
Transmission output selection PV transmission
Transmission output high limit 400 °C
Transmission output low limit 0 °C
Display selection when control output is
off
Main setting value rising rate 0 °C/minute
Main setting value falling rate 0 °C/minute
Output selection when input burnout
: Turns the
control output off
<Program mode>
Character Item Initial Data
Program control change Fixed value control
Step 1 time setting 00.00
Step 2 time setting 00.00
Step 3 time setting 00.00
Step 4 time setting 00.00
Step 5 time setting 00.00
Step 6 time setting 00.00
Step 7 time setting 00.00