User Manual

Operating Instructions Temperature Indicating Controller CF1H
V 1.2
•
01/2007 - 35 -
PV/SV display mode
Actual Main setting
temperature value
+ for approx. 3 s
Program control change Control form is changed between Fixed value
Setting value of and Program.
fixed value control
MODE MODE In Fixed value control, if the MODE key is pressed,
the mode will revert to the PV/SV display mode.
(Fixed value
control)
Fixed value control
Program control
[Factory adjusted as Fixed value control]
Following dislay is available only when Program control.
Step 1 Time setting Mode to set the Time for step 1.
Setting value 00.00
Minute indication
MODE Hour indication
For example, when setting 1 hour 58 minutes,
set as [
].
Setting range: 00.00 … 99.59
[Factory adjusted as 00.00]
Step 2 Time setting Mode to set the Time for step 2.
Setting value [The setting range and the factory adjusted value
are the same as Step 1.]
MODE
Step 3 Time setting Mode to set the Time for step 3.
Setting value [The setting range and the factory adjusted value
are the same as Step 1.]
MODE
Step 4 Time setting Mode to set the Time for step 4.
Setting value [The setting range and the factory adjusted value
are the same as Step 1.]
MODE