User Manual

Operating Instructions Temperature Indicating Controller CF1H
V 1.2
•
01/2007 - 25 -
Transfer rate selection Mode to select a communication transfer rate
Selection to meet the rate of the host computer.
[Factory adjusted as 9600 bps]
MODE
2400 bps
4800 bps
9600 bps
19200 bps
This display is available only when the option [CR2 or CR5] is
applied.
Communication protocol Mode to select a communication protocol.
Selection [Factory adjusted as ]
WIKA standard protocol
Based on Modbus, ASCII mode
This display is available only when the option [CR2 or CR5]
is applied.
PV/SV display mode
Actual Main setting
Temperature value