User Manual

Operating Instructions Temperature Indicating Controller CF1H
V 1.2
•
01/2007 - 17 -
(2) Main setting mode
In the PV/SV display mode, if the MODE key is pressed, the Main setting mode will be selected.
The setting value can be increased or decreased by pressing the
, and FAST keys.
If the MODE key is pressed, the setting value will be registered and the controller will
revert to the PV/SV display.
PV/SV display mode
Actual Main setting
Temperature value
MODE
Main setting
Setting Mode to set the setting value of the main control.
value
MODE Setting range: From Main setting value low limit
to Main setting value high limit
[Factory adjusted as 0 °C]
(3) Sub setting mode
In the PV/SV display mode, if the MODE key is pressed while the
key is being pressed, Sub setting mode
will be selected. The setting value can be increased or decreased by pressing the
, and FAST keys. If
the MODE key is pressed, the setting value is registered and the next setting item will be selected.
PV/SV display mode
Actual Main setting
temperature value
+ MODE
Setting value memory Mode to select the memory number (file)
number selection to be set or to be called.
Selected Selecting items: 1 to 7
value [Factory adjusted as Memory number 1.]
MODE
Auto-tuning Perform/ Mode to designate the auto-tuning Perform or Cancel.
Cancel If Auto-tuning Perform is designated, and the MODE
Designation key is pressed, the controller reverts to PV/SV display mode.
MODE MODE
(
When Perform) To set the other values, cancel the Auto-tuning.
When the ON/OFF action or PD action is selected in
the Control action designation (page 10), this display is
not available.