User Manual

Operating Instructions Temperature Indicating Controller CF1H
V 1.2
•
01/2007 - 11 -
Select the sensor type by rotary switch sensor input (SW303).
Factory adjusted as K, [ ].
[Table 3.2-2]
Rotary Sw.
No.
DIP Sw.
No. 7
Type of
sensor
Scale range
0 OFF K -200 to 1370°C -320 to 2500°F
1 OFF J -200 to 1000°C -320 to 1800°F
2 OFF R 0 to 1760°C 0 to 3200°F
3 OFF B 0 to 1820°C 0 to 3300°F
4 OFF PL-ll 0 to 1390°C 0 to 2500°F
5 OFF N 0 to 1300°C 0 to 2300°F
6 OFF Pt100 -199.9 to 850.0°C -199.9 to 999.9°F
7 OFF JPt100 -199.9 to 500.0°C -199.9 to 900.0°F
0 ON S 0 to 1760°C 0 to 3200°F
1 ON E 0 to 1000°C 0 to 1800°F
2 ON T -199.9 to 400.0°C -199.9 to 750.0°F
3 ON C (W/Re5-26) 0 to 2315°C 0 to 4200°F
4 ON 4 to 20mAdc -1999 to 9999
5 ON 0 to 20mAdc -1999 to 9999
6 ON 0 to 1Vdc -1999 to 9999
7 ON Pt100 -200 to 850°C -320 to 1560°F