Owner's manual

10
WIKA operating instructions calibration system, model BCS10
14051046.01 10/2012 GB/D/F/E
GB
3. Specications
Digital indicator
■
Type of indication: 7-segment LCD
■
Digits: 5 ½-digit
■
Resolution: 0.001
■
Character size: 16.53 mm (0.65")
■
Bargraph display: 20 segment bargraph, 0 ... 100 %
■
Possible pressure units: bar, psi, kg/cm
2
, kPa, MPa and 15 other units
Operating conditions
■
Ingress protection: IP 65
■
Ambient temperature: -10 ... +55 °C
■
Medium temperature: 0 ... +55 °C
■
Storage temperature: -20 ... +70 °C
■
Relative humidity: < 95 % r.H. (non-condensing)
Communication
■
Interface: USB, RS-232
Functions
■
Overpressure protection: Adjustable overpressure valve
■
Pressure ne-adjustment: By means of the ne-adjustment valve
■
Measuring rate: 30/min. to 10/sec. selectable
■
Memory: MIN/MAX values
Integrated data logger
■
Data logger: Cyclic data logger: automatic recording of up to 8.500
values
Cycle time: selectable from 1 ... 3.600 sec. in the following
steps
1 s, 2 s, 5 s, 10 s, 30 s, 1 min, 2 min, 5 min, 10 min,
30 min and 1 h
CPGLog data-logger evaluation software is needed to
use the data logger function.
The order number of the CPGlog software is given in the
data sheet SP 60.08.