User guide

Transferring the Action Replay Code Engine to your Action Replay Memory Card

You now need to uncompress the downloaded file to your Action Replay Memory Card. To do this, remove the USB cover from the Action

Replay Memory Card by pulling it away from the card. Insert the USB side of the Action Replay Memory Card in to a free USB connection on

your computer and allow your computer to automatically install the necessary drivers. Right Click (or Command+Click on a Mac) on the

downloaded compressed zip file and select the ‘uncompress’ option. When given the option of where to extract the files choose the

removable disc drive representing the connected Action Replay Memory Card. When complete disconnect the Action Replay Memory Card

and refit the USB cover ensuring that it is correctly aligned.

Connecting your Action Replay Memory Card to your Wii Console

In order to load the Action Replay Code Engine on your console you need to insert the Action Replay Memory Card in to the SD card slot on

your Wii console. To do this, please follow these steps:

Step 1: Open the cover located on the front of the Wii console to reveal the SD card slot.

Step 2: Insert the SD side of the Action Replay Memory Card in to the SD card slot on your Wii console. When inserting the SD card apply

pressure to the rear until the card is locked inwards with only the USB side remaining outwards.

Step 3: Close the cover on the front of the Wii console.