User Guide

MIS_TV_Remote_ALL_Set_Up_20-04
Power on your TV through the TV itself or with the remote control that came with your TV.
• Ensure that your Wightman TV remote control has
batteries installed. TIP: Wightman TV remote uses
two AA batteries.
• Press the STB button once. TIP: The STB button
should light up.
• To set up the Entone Kamai or
Amino Amulet 6 Set-Top Boxes,
press and hold SETUP and
the number 7 until the STB
button blinks twice.
• To set up the
Amino 140 or 540 Set-Top Boxes,
press and hold SETUP and
the number 1 until the STB
button blinks twice.
• To test the Wightman
remote with the Set-Top Box, press
guide and channel change.
1. On your Wightman TV remote control, press TV
once; the TV button will blink once. Then press and
hold SETUP until the TV button blinks twice.
2. Press the numbers 9-9-1.
3. The TV button will blink twice.
4. Aim the remote control at your TV and press
POWER once.
5. Press and release the CH+ button once every second
until the TV turns o. NOTE: In this search mode, the
remote control will send codes from its library to
the selected device, starting with the most popular
code rst.
6. Press POWER to turn your TV back on.
7. Press SETUP once to lock in the code. The TV button
will blink twice to indicate that the code is saved.
NOTE: If your TV does not turn on during step 6,
repeat step 5 more slowly.
For support and full remote control manufacturer’s guides, visit wightman.ca/support/tv
Technical Support is also available 24/7/365 by calling 1-877-327-4440
Potenza Remote
• Ensure that your Wightman TV remote control has
batteries installed. TIP: Wightman TV remote uses
two AA batteries.
• Press and hold STB and OK/SEL buttons until the STB
button lights up solid.
• Point the remote at the Set-Top box.
• To set up the Entone Kamai Set-
Top Boxes, press the numbers
2-5-8, and make sure the Set-Top
Box turns o.
• To set up the Amino 140 or
540 Set-Top Boxes, press the
numbers 2-5-6, and make sure
the Set-Top Box turns o.
• Press the STB button to store
the change.
1. On your Wightman TV remote control, press the
TV and OK/SEL buttons at the same time. The TV
button will turn on indicating that it’s ready to
be programmed.
2. Aim the remote control at the TV.
3. Press and release the CH+ button once every second
until the TV turns o. NOTE: The remote control will
send codes from its library to the selected device,
starting with the most popular codes rst.
4. Press the TV button after your TV has turned o. This
will save the code. NOTE: If your TV does not turn on
after step 4, repeat steps 1 through 4.
Easy Clicker UR2-211 Remote
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
SET-TOP BOX
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
TV
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
SET-TOP BOX
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
TV
• Ensure that your Wightman TV remote control
has batteries installed. TIP:
Wightman TV remote uses two
AA batteries.
• To set up the Entone Kamai or Amino
Amulet 6 Set-Top Boxes,
press and hold SETUP and
the Green D button until the
CABLE POWER button ashes twice.
• To set up the Amino 140 or
540 Set-Top Boxes, press and
hold SETUP and the Yellow
A button until the CABLE
POWER button ashes twice.
1. On your Wightman TV remote control, press and
hold the SETUP button until it blinks twice.
2. Press the TV POWER button.
3. Press and hold the OK/SELECT button.
4. Let go of the OK/SELECT button when the TV
turns o.
Royal Big Button Remote
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
SET-TOP BOX
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
TV
Entone Kamai
Amino Amulet 6
Amino 140 or 540
Entone Kamai
Amino 140 or 540
Entone Kamai
Amino Amulet 6
Amino 140 or 540