Brochure

175175
RST –
Technical data
Temperature range: -40° C to +100° C
Operating ambient
temperature: under full load (20 A) 55° C
Material: Contact parts: brass, silver-plated
Housing parts: thermoplastic material PA 66, halogen-free, V2
Sealing material: NBR
Wiring: Individual wires 2.5 mm
2
, halogen-free
(other cross-sections on request)
Regulations: DIN VDE 0606 T200; DIN EN 61984 (VDE 0627); VDE 0110
IEC 60999
Approvals: VDE, UL, CSA being prepared
Degree of protection: IP 65, IP 66, IP 67, and IP 68
(3 m; 2 hours) ˆ= 0.3 bar
IK code: IK 7 (2 Joule)
Rated voltage: 250 V / 400 V
Rated current: 20 A (25 A)
Coding: Mechanical coding symbolized by color code.
Gray and black with the same mechanical coding.
Other codings are optional.
Note: Touch protection generally guaranteed even when disconnected
.
Ground conductor leading. Connection to the live cable must be with a female connector
according to the regulations. It is therefore not possible to create a ring circuit arrangement!
Only pluggable in the correct pole configuration; 1 pole cannot be connected. Contacts
protected against strain on the cable. All components can be interlocked.
A locking device is required for IEC 6153 approval.
DIN VDE 0606 T200 conformity does not automatically exclude the danger of confusion
with third-party installation plug connector systems!
Installation plug connector systems are no substitute for national plug/
outlet systems for domestic use.