Brochure

170170
Mounting instructions RST20i2…i3
Connector mounting
Connect the wires ... ... and disconnect them
Close the connector ... ... and open it
Lock the housing ... ... and unlock it
How to insert the (optional) manual disconnect into the connector
(only possible for the female connector)
The manual disconnect* can be used
as an alternative and enables
disconnecting without a tool.
* Note:
Connections with manual disconnect are not approved according
to VDE 0606 (fixed installations, for example in buildings).
The VDE 0627 regulation will still apply nevertheless.
Also see the “Installation instructions”!
The descriptions on this page merely serve as an overview.
For assembly and installation, only the installation instructions
supplied together with the products are binding.
Tightening
torque
4.0
+ 1.0
Nm
Screw connection: :
tightening torque typically
typ. 0.8 – 1.0 Nm