Brochure
141414
The pluggable electrical installation
also for industrial use
■ The challenge:
Whether individual applications or
complex systems – the tasks are the
same: electrical consumer devices must
be connected quickly and safely.
Conventional installations do not
meet these requirements. Cutting the
cables to length, stripping the cable
sheath and wire insulation, and finally
connecting the components, are not
only time-consuming operations, but
frequently also cause errors and result
in reworking. Cooperation of different
trades (mechanical and electrical
installation) during the setup of a
system impedes the continuous
progress of operations. This does not
just apply to initial installations.
For expansions, regular servicing or
replacement of defective devices, the
same installation steps recur over and
over again.
■ The solution:
As a complete installation system,
gesis
IP+ provides definite time savings
during installation. The components
are pre-assembled in the factory and
simply plugged together in the field.
Troublesome cutting to length,
stripping of sheath and insulation, and
connecting is now a matter of the past.
Operational downtimes are thus
clearly reduced. In the case of defective
devices or regular servicing, the
consumer devices can be disconnected
from the network quickly. As an
additional advantage the installer does
not have to open the device for
completion of the electrical connection,
which means that incorrect assembly
especially of water-protected devices
can be excluded.
Possible applications:
– Motor connection (3~)
– Power distribution 250/400 V ~
– Power supply up to 50 V, bus
– Voltage supply 24 V, ASi
– Workstation illumination
– Painting checks
Pre-assembly in a separate location:
The gesis IP+ installation system enables completely
new possibilities. Entire system sections can be
pre-assembled and tested independent of the location
of operation.
The individual modules are simply plugged together
on site.
Complete system for industrial use
Connecting quickly and safely
engineering
engineering