Owner manual

K9
DATA SUBJECT TO CHANGE WITHOUT NOTICE
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
ENVIRONMENTAL CONTROLS
ADVANTAGE “RP36” SERIES AIR-COOLED
SIDE-MOUNTED AIR CONDITIONERS
MOUNTING PLAN
UNIT MUST BE 4" [100mm]
MINIMUM ABOVE FLOOR
FOR FILTER ACCESS
NEMA
TYPE 3R & 12
MAINTAINED
80
70
90 100 1 10 120 130
3600
4800
6000
7200
8400
9600
2400
1200
0
Ambient Temperature (ºF)
Cooling Capacity (BTU/H)
Maximum enclosure
air temperature ºF
75
80
90
100
110
120
125
KA4C6RP36R
36.75
[955.5]
15.35
[389.9]
36.30
[922.0]
10.94
[277.8]
1
2
3
4
1. 10
[27.9]
13.16
[334.3]
1. 4 3
[36.3]
12.50
[317.5]
TYP.
(12) .281 [7.0]
DIA. HOLES
4.88
[124.0]
28.96
[735.6]
7. 7 5
[196.9]
1.84
[46.7]
6.75
[171.5]
TYP.
5.75
[146.1]
36.75
[933.5]
13.25
[336.6]
1. 5 6
[39.6]
36.30
[922.0]
15.34
[389.6]
1. 8 4
[46.7]
1. 10
[27.9]
13.16
[334.3]
1. 4 3
[36.3]
12.50
[317.5]
TYP.
(12) .281 [7.0]
DIA. HOLES
4.88
[124.0]
28.96
[735.6]
7. 7 5
[196.9]
1. 8 4
[46.7]
6.75
[171.5]
TYP.
5.75
[146.1]
1. 8 4
[46.7]
1
3
4
2
3
4
Accessories and Options
• Cooling Effect Detector
• Enclosure Heater
• Filter Recoating Adhesive
• Filters for replacement
• Internal corrosion protection
• Painted Metal Grille
• Power Loss Delayed Compressor
Start
• Short Cycle Protector
• Special paint finishes
Standard Features
• Built-in Condensate Evaporator
• CFC-Free Refrigerant
• Crankcase Compressor Heater
• Digital Temperature Display
• EMI/RFI Suppressor
• Head Pressure Control Switch
• Filters
• Low Temperature Control Thermostat
• M/TAB Mounting System
• NEMA 3R & 12 Rating Maintained
• UL/CUL Recognized
‡
• Textured Beige Powder Finish
MODEL
RATED CAPACITY 95/95 RATING AMBIENT TEMP. °F VOLTS HZ RUNNING APPROX.
(BTU/H) (BTU/H) MAX./MIN. AMPS WEIGHT (LBS.)
WA4C6RP36R 6000 4500 125/50 115/100 60/50 19.5/20.0 123
W2A4C6RP36R 6000 4500 115/50 230/200 60/50 19.5/20.0 123
ADVANTAGE SERIES RP36 ADVANTAGE AIR-COOLED PANEL-MOUNTED AIR CONDITIONERS
FEATURES-SPECIFICATIONS
PERFORMANCE CHART
WA4C6RP36R
Operation within shaded area not
recommended.
Dimensions, inches [metric], are for reference only and subject to change.
‡
UL/CUL Recognized models are available as Listed at added cost.