Owner manual

DATA SUBJECT TO CHANGE WITHOUT NOTICE
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
K7
ENVIRONMENTAL CONTROLS
ADVANTAGE “RP28” SERIES AIR-COOLED
SIDE-MOUNTED AIR CONDITIONERS
Accessories and Options
• Cooling Effect Detector
• Enclosure Heater
• Filter Recoating Adhesive
• Filters for replacement
• Internal corrosion protection
• Painted Metal Grille
• Power Loss Delayed Compressor
Start
• Short Cycle Protector
• Special paint finishes
Standard Features
• Condensate Evaporator
• CFC-Free Refrigerant
• Crankcase Compressor Heater
• Digital Temperature Display
• EMI/RFI Suppressor
• Head Pressure Control Switch
• Filters
• Low Temperature Control Thermostat
• M/TAB Mounting System
• NEMA 3R & 12 Rating Maintained
• UL/CUL Recognized
‡
• Textured Beige Powder Finish
MODEL
RATED CAPACITY 95/95 RATING AMBIENT TEMP. °F VOLTS HZ RUNNING APPROX.
(BTU/H) (BTU/H) MAX./MIN. AMPS WEIGHT (LBS.)
WA4C3RP28R 3000 2220 125/50 115/100 60/50 9.8/9.7 86
W2A4C3RP28R 3000 2220 115/50 230/200 60/50 5.5/5.6 86
ADVANTAGE SERIES RP17 ADVANTAGE AIR-COOLED PANEL-MOUNTED AIR CONDITIONERS
NEMA
TYPE 3R & 12
MAINTAINED
27.75
[704.9]
12.35
[313.7]
27.39
[695.6]
10.94
[277.8]
1
2
3
4
80
70
90 100 1 10 120 130
2250
3000
3750
4500
5250
6000
1500
750
0
Ambient Temperature (ºF)
Cooling Capacity (BTU/H)
Maximum enclosure
air temperature ºF
75
80
90
10 0
11 0
120
125
KA4C3RP28R
1.68
[42.7]
9.00
[228.6]
(8) .281 [7.0]
DIA. HOLES
6.50
[1 65.1]
1 2.88
[327.2]
5.00
[1 27.0]
1.78
[45.2]
27.75
[704.9]
8.00
[203.2]
TYP.
1.84
[46.7]
1. 1 8
[30.0]
1 0.00
[254.0]
1 2.35
[31 3.7]
8.00
[203.2]
TYP.
6.50
[1 65.1]
1 2.88
[327.2]
5.00
[1 27.0]
1.78
[45.2]
1.91
[48.5]
9.00
[228.6]
1. 1 8
[29.9]
1 0.00
[254.0]
1.67
[42.4]
27.75
[704.8]
1 0.94
[277.8]
1.50
[38.1]
1 0.17
[258.3]
8.64
[21 9.4]
8.59
[21 7.9]
1 2.35
[31 3.6]
6.21
[1 57.7]
2.51
[63.7]
1.00 [25.4] DIA. HOLE
3
4
2
3
4
1
MOUNTING PLAN
UNIT MUST BE 4" [100mm]
MINIMUM ABOVE FLOOR
FOR FILTER ACCESS
FEATURES-SPECIFICATIONS
PERFORMANCE CHART
WA4C3RP28R
Operation within shaded area not
recommended.
Dimensions, inches [metric], are for reference only and subject to change.
‡
UL/CUL Recognized models are available as Listed at added cost.