User guide

WAX-SSN4 & WACPX-SSN4 ENCLOSURES
NEMA 4X TWO DOOR FLOOR MOUNT DISCONNECT
F46
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
CATALOG NUMBER
ENCLOSURE SIZE BACKPANEL CATALOG NUMBER* BACKPANEL
HXWXD
WHITE “G”
SIZE A X B
WA60X4912SSN4 60.12x49.75x12.12 (1527x1264x308) NPDD6048 NPDD6048G 56.00x44.00 (1422x1118)
WA60X4918SSN4 60.12x49.75x18.12 (1527x1264x460) NPDD6048 NPDD6048G 56.00x44.00 (1422x1118)
WA60X6112SSN4 60.12x61.75x12.12 (1527x1568x308) NPDD6060 NPDD6060G 56.00x56.00 (1422x1422)
WA60X6118SSN4 60.12x61.75x18.12 (1527x1568x460) NPDD6060 NPDD6060G 56.00x56.00 (1422x1422)
WA72X6112SSN4 72.12x61.75x12.12 (1832x1568x308) NPDD7260 NPDD7260G 68.00x56.00 (1727x1422)
WA72X6118SSN4 72.12x61.75x18.12 (1832x1568x460) NPDD7260 NPDD7260G 68.00x56.00 (1727x1422)
WA72X7312SSN4 72.12x73.75x12.12 (1832x1873x308) NPDD7272 NPDD7272G 68.00x68.00 (1727x1727)
WA72X7318SSN4 72.12x73.75x18.12 (1832x1873x460) NPDD7272 NPDD7272G 68.00x68.00 (1727x1727)
WA72X7324SSN4 72.12x73.75x24.12 (1832x1873x613) NPDD7272 NPDD7272G 68.00x68.00 (1727x1727)
WAX-SSN4 ENCLOSURES NEMA 4X TWO DOOR RIGHT FLANGE DISCONNECT
• Unless specified, the right door in con-
sidered to be the “master” door on the
“Right Flange” mount enclosures and the
left door is the “master” door on the
“Center Post” mount enclosures.
• A mechanical interlock is provided and
prevents the slave door from opening
before opening the master door
• Disconnects come with a universal
cutout which provides mounting for most
disconnectsoperatorsbyusingoperator
adapters
• Removable center post permits easy
panel installation
Finish
• Except for back, exterior has standard
grained finish, interior has standard
commercial finish
• Optional back panels are white polyester
powder over phosphatized surfaces
• Optional “G” panels have a conductive
finish
Accessori es
• See pages J1-J22
• Blank adapter plates on pages F61
CATALOG NUMBER
ENCLOSURE SIZE BACKPANEL CATALOG NUMBER* BACKPANEL
HXWXD
WHITE “G”
SIZE A X B
WA60CPX4812SSN4 60.12x48.50x12.12 (1527x1273x308 NPDD6048 NPDD6048G 56.00x44.00 (1422x1118)
WA60CPX6012SSN4 60.12x60.50x12.12 (1527x1273x308) NPDD6060 NPDD6060G 56.00x56.00 (1422x1422)
WA72CPX7212SSN4 72.12x72.50x12.12 (1832x1273x308) NPDD7272 NPDD7272G 68.00x68.00 (1728x1728)
WA72CPX7218SSN4 72.12x72.50x18.12 (1832x1273x460) NPDD7272 NPDD7272G 68.00x68.00 (1728x1728)
WACPX-SSN4 ENCLOSURES NEMA 4X TWO DOOR CENTERPOST FLOOR MOUNT DISCONNECT
*Back panels must be ordered separately. Panels are made from 10 gauge steel.
Note:
1. See pages F51-F60 for various brands of
disconnects for “E”,“F”,“G”, “K” and “WB”
dimensions.
2. Disconnects will occupy space on panel
shown by dimensions “E”,“F”, “G” and “K”.
Wiring space “WB” is available when discon-
nect is installed in the enclosure.
3. When ordering 24.13 (613mm) deep enclo-
sures, long connecting rods must be
ordered. Long connecting rods are avail-
able from disconnect manufacturers.
• ABB Controls flange-operated devices
• Eaton Cutler-Hammer C361 devices
• Eaton Cutler-Hammer C371 operating
mechanisms C371E and C371F, order
catalog number C371CS1 connecting rod.
For C371G and C371K, order catalog
number C371CS2 connecting rod.
• General Electr ic TDA devices, order
catalog number TDSR extended length
drive rod
• For Schneider Square D
®
9422 devices,
order catalog number 9422-R2 extra long
operating rod(s). Some devices require two
rods.
Refer to National Electrical Code
®
article 430-
10(b) for wir ing space required for line side
conductors to be connected to disconnect. Verify
your application to determine if wiring space is
adequate.
C
L
TOP OF DISCONNECT
TOP HOLE IN
DISCONNECT HANDLE
THIS SPACE
OCCUPIED BY
DISCONNECT
SWITCH AND
FUSE CLIP
(IF USED)
OR CIRCUIT
BREAKER
2.44G
F
E
PANEL
WB
2.06
2.06
WB
PANEL
BREAKER
OR CIRCUIT
(IF USED)
FUSE CLIP
SWITCH AND
DISCONNECT
OCCUPIED BY
THIS SPACE
DISCONNECT HANDLE
TOP HOLE IN
TOP OF DISCONNECT
L
C
C
L
OF PANEL
E
F
G+1.18 K
"WAX-SSN4" Style Enclosures "WACPX-SSN4" Style Enclosure
C
L
1.31
L
C
1.92
“WAX-SSN4” Style Enclosures “WACPX-SSN4” Style Enclosures