User guide

WAX-SSN4 & WACPX-SSN4 ENCLOSURES
NEMA 4X TWO DOOR FLOOR MOUNT DISCONNECT
F45
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
• For General Electric devices, order
catalog number TDSR extended length
drive rod
• For Schneider Square D devices, order
catalog number 9422-R2 extra long oper-
ating rod(s). Some devices require two rods.
IMPORTANT Ordering Information
• Disconnect switch or circuit breakers,
operating handle and operating mecha-
nism are not furnished with the enclosure
and must be ordered separately from the
disconnect manufacturer
• Disconnect ordering information is
located on page F50
• Review space occupied by disconnect
drawings on page F46 and disconnect
tables on pages F51-F60 to determine if
the disconnect device you are using will
fit the enclosure size you have selected
Construction
• Bodies and doors fabricated from
12 & 10 gauge 304 stainless steel.
• Continuously welded seams ground
smooth
• Body stiffeners provided for extra rigidity
• Heavy gauge continuous hinges to
secure doors
• Heavy duty 3-PT 316L SS padlocking
handles on all doors
• Print pocket is provided
• 15-inch floor stands are welded to
enclosure
• Doors are sealed with polyurethane
poured-in-place gasket
• Heavy duty lifting eyes and provisions
for fluorescent lighting are provided
• Panel supports
• Collar studs are provided for mounting
optional sub panels
• Grounding provisions provided
FEATURES-SPECIFICATIONS
UL File E64791
CSA File LL66078
Applications
Enclosure having
the “WM” preferred
cutout are sized for
use with up to 200A
disconnect switches
and up to 400A cir-
cuit breakers unless
otherwise specified.
The “WM” preferred
cutout accepts the
smaller operating
handle whose mount-
ing hole centers are
4.677 in. apart. “WM” preferred cutouts are
standard in mild steel wall-mount enclo-
sures, modular enclosures and some select
large mild steel and standard stainless steel
offerings.
“WM” preferred cutout are designed to
house the following:
Allen-Bradle y
• 1494V disconnect switches with flange-
mount variable depth operating mecha-
nisms and 1494V flange-mounted
variable depth operating mechanisms
for circuit breakers
• 140U flexible cable operating mecha-
nisms and 140U molded case circuit
breakers
• 1494C cable-operated disconnect
switches with flange-mount handles
• 194RC cable-operated flange-mount
handles for use with the NFPA 79 compli-
ant 194R IEC rotary disconnect switches
Allen-Bradley 1494V-R1, -R2 and -W2 oper-
ating handles and Allen-Bradley 1494F dis-
connect devices or 1494D circuit breaker
operators will NOT fit these enclosures.
• ABB Controls flange-mounted variable
depth operating mechanisms for discon-
nect switches and circuit breakers. Also
the cable version for circuit breakers.
• Eaton Cutler-Hammer Type C361 flange-
mount variable depth operating mecha-
nisms with disconnect switches and Type
C371 flange-mount variable-depth oper-
ating mechanisms for circuit breakers.
• General Electric Type STDA flange han-
dles and variable depth operating mech-
anisms for disconnect switches and
circuit breakers. Also Spectra Flex
™
cable
operators for circuit breakers
• Siemens ITE Max-Flex
™
flange-mounted
variable depth operating handles for cir-
cuit breakers
• Schneider Square D
®
Class 9422 discon-
nect switches with flange-mounted vari-
able depth operating mechanisms or
cable mechanisms and Class 9422
flange-mount variable-depth operating
mechanism or cable mechanisms for cir-
cuit breakers.
These enclosures will not accept
Schneider Square D
®
Class 9422 brack-
et-mounted disconnect devices, Class
9422TG1 or TG2 devices.
All 24.12 in. and deeper enclosures using
short connecting rods by the following
manufacturers
• ABB Controls flange-operated devices
• Eaton Cutler-Hammer C361 devices
• Eaton Cutler-Hammer C371 mechanisms
which use C371E, F, G, K operating
mechanism (see Disconnect Enclosure
Accessories)
• General Electric Type TDA devices (see
Disconnect enclosure Accessories)
• Schneider Square D Class 9422 devices
(see Disconnect enclosure Accessories)
Requir e long connecting rods order ed in
place of short connecting r ods.
• For Eaton Cutler-Hammer operating
mechanisms C371E and C371F order cat-
alog number C371CS1 connecting rod.
For C371G and C371K order catalog
number C371CS2 connecting rod.
WA72X7312SSN4
Industry Standards
UL 508, Types 4, 4X & 12
CSA Cer tified, Type 12
NEMA/EEMAC Types 4, 4X & 12
(UL4&4XpendingonCPXversion)
“WM” PREFERRED
CUTOUT
for WAXSSN4 &
WACPXSSN4