User guide

ABN12 FIXED DEPTH SERIES ENCLOSURES
NEMA 12 FLANGED SINGLE DOOR DISCONNECT
2.00
3.00
1.25
3.00
0.63
H
1.25
0.63
0.44
W-3.00
H-1.56
X
X
DOOR STIFFENER
IF H = 42.00" OR MORE
D
D-0.28
Y
Y
0.88
0.88
B1.75 2.62
MOUNTING FEET
PANEL
(Order
Separately)
STIFFENER
SEE Page F27
OMIT TWO MIDDLE
STUDS IF H = LESS
THAN 31.00"
OMIT TWO MIDDLE STUDS
IF W = LESS THAN 32.00"
SECTION Y-Y
0.19
D
0.88
0.63
1.31
1.09
12 GA.
0.75
2.75
14 GA.
2.38
1.25 TYP
3/8 - 16 COLLAR
STUD
PANEL
(ORDER SEPARATELY)
BODY
STIFFENER
MOUNTING
FEET
DOOR
STIFFENER
CONTINUOUS
HINGE
GASKET
SECTION X-X
E
F
2.63
1.31
1.50
Ø0.44
3.00
3.00
Note:
E = 3.84 when Depth = 8.00
E = 6.75 when Depth = 10.00
Disconnects will occupy space on panel shown by
Dimensions “E”, “ F”, & “G”. Wiring space “WB” is
available when disconnect is installed in the enclosure.
(Except enclosures for 200 amp switches)
E = 9.50 when Depth = 12.00
E = 9.50 when Depth = 16.00
E = 10.50 when Depth = 12.00
WB = Wiring Space
(Except enclosures for 200 amp switches)
Notes:
1. Large print pocket (8" x 10") is
provided in each enclosure.
2. Panels are made from 12 Ga. steel.
5. See page F27 for Stiffener Locations.
3. Panels have flanges along all sides
when either dimension exceeds 17".
4. Enclosures under 40" high require
2-point door hardware and enclosures
40" high and larger require 3-point
door hardware.
TOP HOLE IN
R.H. FLANGE.
Refer to National Electrical Code article 430-10(b)
for wiring space requited for line side conductors to be
connected to disconnect. Verify you application to
determine if wiring space is adequate.
1.50
A
1.50
H-6.00
WB
G
W
THIS SPACE IS OCCUPIED
BY DISCONNECT SWITCH
AND FUSE CLIP (IF USED)
OR CIRCUIT BREAKER.
C
L
CATALOG BODY/DOOR ENCLOSURE SIZE BACK PANEL CATALOG NUMBER* BACK PANEL
NUMBER STEEL GAUGE HXWXD WHITE “G” SIZEAXB
ABN12362510 14/14 36.00x25.38x10.13 (914x645x257) NP3624 NP3624G 33.00x21.00 (838x533)
ABN12363110 14/14 36.00x31.38x10.13 (914x797x257) NP3630 NP3630G 33.00x27.00 (838x686)
ABN12423110 14/14 42.00x31.38x10.13 (1067x797x257) NP4230 NP4230G 39.00x27.00 (991x686)
ABN12483710** 14/14 48.00x37.38x10.13 (1219x949x257) NP4836 NP4836G 45.00x33.00 (1143x838)
ABN12603710** 14/14 60.00x37.38x10.13 (1524x949x257) NP6036 NP6036G 57.00x33.00 (1448x838)
ABN12363212 14/14 36.00x32.38x12.13 (914x822x308) NP3630 NP3630G 33.00x30.00 (838x762)
ABN12423212 14/14 42.00x32.38x12.13 (1067x822x308) NP4230 NP4230G 45.00x30.00 (1143x762)
ABN12483812** 14/14 48.00x38.38x12.13 (1219x975x308) NP4836 NP4836G 45.00x34.00 (1143x864)
ABN12483812A*** 14/14 48.00x38.38x12.13 (1219x975x308) NP4836 NP4836G 45.00x34.00 (1143x864)
ABN12603812 14/14 60.00x38.38x12.13 (1524x975x308) NP6036 NP6036G 57.00x34.00 (1448x864)
ABN12603812A*** 14/14 60.00x38.38x12.13 (1524x975x308) NP6036 NP6036G 57.00x34.00 (1448x864)
ABN12483816 14/14 48.00x38.38x16.13 (1219x975x410) NP4836 NP4836G 45.00x33.00 (1143x838)
ABN12603816 14/14 60.00x38.38x16.13 (1524x975x410) NP6036 NP6036G 57.00x33.00 (1448x838)
ABN12 FIXED DEPTH SERIES WALL-MOUNT DISCONNECTS (CONT.)
F24
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
*Back panels must be ordered separately.
**Enclosures are supplied with closed cell neoprene gasket (not foam-in-place)
***Suitable for 200 AMP disconnect Switches and 1494FL4 door hardware only. Blank adapter plate WA22BAP will not fit on these enclosures.