User guide

ABN12 FIXED DEPTH SERIES ENCLOSURES
NEMA 12 FLANGED SINGLE DOOR DISCONNECT
F23
CATALOG BODY/DOOR ENCLOSURE SIZE BACK PANEL CATALOG NUMBER* BACK PANEL
NUMBER STEELGAUGE HXWXD WHITE “G” SIZE A X B
ABN12242108 14/14 24.00x21.38x8.13 (610x543x206) NP2420 NP2420 21.00x17.00 (533x432)
ABN12242508 14/14 24.00x25.38x8.13 (610x645x206) NP2424 NP2424 21.00x21.00 (533x533)
ABN12302108 14/14 30.00x21.38x8.13 (762x543x206) NP3020 NP3020 27.00x17.00 (686x432)
ABN12302508 14/14 30.00x25.38x8.13 (762x645x206) NP3024 NP3024 27.00x21.00 (686x533)
ABN12362508 14/14 36.00x25.38x8.13 (914x645x206) NP3624 NP3624 33.00x21.00 (838x533)
ABN12363108 14/14 36.00x31.38x8.13 (914x797x206) NP3630 NP3630 33.00x27.00 (838x686)
ABN12423108 14/14 42.00x31.38x8.13 (1067x797x206) NP4230 NP4230 39.00x27.00 (991x686)
ABN12242110 14/14 24.00x21.38x10.13 (610x543x257) NP2420 NP2420 21.00x17.00 (533x432)
ABN12242510 14/14 24.00x25.38x10.13 (610x645x257) NP2424 NP2424 33.00x21.00 (838x533)
ABN12302110 14/14 30.00x21.38x10.13 (762x543x257) NP3020 NP3020 27.00x17.00 (686x432)
ABN12302510 14/14 30.00x25.38x10.13 (762x645x257) NP3024 NP3024 27.00x21.00 (686x533)
ABN12 FIXED DEPTH SERIES WALL-MOUNT DISCONNECTS
FEATURES-SPECIFICATIONS
Industry Standards
UL 508
,Types12&13
CSA Cer tified, Type 12
NEMA/EEMAC Types 12 & 13
UL File E64791
CSA File LL66078
• Guide brackets and door catch are
welded to inside of door
• Locking bars are also provided for
door hardware
• Spacers and screws are provided
to secure disconnect switch and
fuse block adapter plate to the panel
• Print pocket is provided
• Enclosures under 40" high require
2-point door hardware
• Enclosures 40" high and larger
require 3-point door hardware
• Instructions to locate and install
disconnect switches, circuit breakers,
and operating mechanisms is
provided
Finish
• ANSI 61 gray polyester powder inside
and out over phosphatized surfaces
• Optional back panels are white
polyester powder over phospha-
tized surfaces
• Optional “G”panelshaveacon-
ductive finish
Accessories
• Back panels (reference tables)
• Blank Adapter Plates are on page
F61
IMPORTANT
• Disconnect switch or circuit break-
ers, operating handle, operating
mechanism, and door hardware
are not furnished with enclosure
and must be ordered separately
from the disconnect manufacturer
• Operator adapter plates are not
required with this enclosure
• Disconnect and door hardware
ordering information is located on
page F25
• Review space occupied by discon-
nect drawing on page F25 and
disconnect tables on page F26 to
determine if the disconnect device
you are using will fit the enclosure
size you have selected
ABN12242108
Applications
Designed to house Allen-Bradley 1494F
flange-mounted disconnect switches
and Bulletin 1494D
flange-mounted
operators for circuit breakers. Provides
protection from dust, dirt, oil and water.
Construction
• Bodies and doors fabricated from
14 gauge steel
• Plasma welded seams
• Rolled lip around all sides of
enclosure opening excludes liquids
and contaminants
• Doors easily removed by pulling
continuous hinge pin
• Polyurethane poured-in-place gasket
• External mounting feet
• Collar studs for mounting optional
back panel
• Grounding provisions provided
• Holes are provided in body and door
for mounting disconnect switch, oper-
ating mechanism and door hardware.
*Back panels must be ordered separately.
www.hubbell-wiegmann.com
Data Subject To Change Without Notice