Owner manual

N4 SERIES ENCLOSURES
NEMA 4 SINGLE DOOR WALL-MOUNT
D19
N4 SERIES SINGLE DOOR ENCLOSURES (CONT.)
*Back panels must be ordered separately.
**Enclosures are supplied with closed cell neoprene gasket (not foam-in-place).
2.00
3.38
H-1.82
1.25
H
0.63
0.63
0.44
XX
D
D
Y
Y
1. Large print pocket (8X10) is furnished if
H = 20.00" or more and W = 20.00" or more.
Otherwise
small (6X6) print pocket is provided.
2. Panels are made from 12 Ga. steel.
NOTES:
3. Panels have flanges along all sides when either
dimension exceeds 17".
4. The number of door clamps is dependent on
size of enclosure. Clamps are furnished along
three sides of door.
PRINT POCKET
SEE NOTE 1
5. F = 3" when W is 16" or greater and 1-1/4"
when W is 12" or less.
DOOR
CLAMP
PADLOCKING
HASP &
STAPLE
OF ENCLOSURE
C
C
OMIT TWO MIDDLE STUDS
IF W < 31.00"
O
MIT TWO
MIDDLE STUDS
IF H < 31.00"
SECTION Y-Y
C
A
MOUNTING
FEET
3/8 - 16 COLLAR STUD
CONTINUOUS
HINGE
PA N E L
(Order Separately)
W-1.66
14 GA.
SECTION X-X
14 GA.
1.093
12 GA.
1. 3 8
0.75
0.19
.91
1. 1 6
D
1. 3 8
0.75
C
GASKET
B
H-6.00
0.44 TYP
FTYP
E
0.91
1. 5 0
TYP
0.88
TYP
0.88
TYP
1. 5 0 T Y P
W
N4243008 14/14 24.00x30.00x8.00 (610x762x203) NP3024 NP3024G 21.00x27.00 (533x686) No No 4.313 (110)
N4302008 14/14 30.00x20.00x8.00 (762x508x203) NP3020 NP3020G 27.00x17.00 (686x432) No No 5.813 (148)
N4302408 14/14 30.00x24.00x8.00 (762x610x203) NP3024 NP3024G 27.00x21.00 (686x533) No No 5.813 (148)
N4303008 14/14 30.00x30.00x8.00 (762x762x203) NP3030 NP3030G 27.00x27.00 (686x686) No Yes 5.813 (148)
N4362408 14/14 36.00x24.00x8.00 (914x610x203) NP3624 NP3624G 33.00x21.00 (838x533) No No 7.313 (186)
N4363008 14/14 36.00x30.00x8.00 (914x762x203) NP3630 NP3630G 33.00x27.00 (838x686) No Yes 7.313 (186)
N4423008 14/14 42.00x30.00x8.00 (1067x762x203) NP4230 NP4230G 39.00x27.00 (991x686) No Yes —
N4423608 14/14 42.00x36.00x8.00 (1067x914x203) NP4236 NP4236G 39.00x33.00 (991x838) Yes Yes —
N4483608** 14/14 48.00x36.00x8.00 (1219x914x203) NP4836 NP4836G 45.00x33.00 (1143x838) Yes Yes —
N4603608** 14/14 60.00x36.00x8.00 (1524x914x203) NP6036 NP6036G 57.00x33.00 (1448x838) Yes Yes 6.656 (169)
N4201610 14/14 20.00x16.00x10.00 (508x406x254) NP2016 NP2016G 17.00x13.00 (432x330) No No —
N4242010 14/14 24.00x20.00x10.00 (610x508x254) NP2420 NP2420G 21.00x17.00 (533x432) No No 4.313 (110)
N4302410 14/14 30.00x24.00x10.00 (762x610x254) NP3024 NP3024G 27.00x21.00 (686x533) No No 5.813 (148)
N4363010 14/14 36.00x30.00x10.00 (914x762x254) NP3630 NP3630G 33.00x27.00 (838x686) No Yes 7.313 (186)
N4483010** 14/14 48.00x30.00x10.00 (1219x762x254) NP4830 NP4830G 45.00x27.00 (1143x686) Yes Yes —
N4483610** 14/14 48.00x36.00x10.00 (1219x914x254) NP4836 NP4836G 45.00x33.00 (1143x838) Yes Yes —
N4603610** 14/14 60.00x36.00x10.00 (1524x914x254) NP6036 NP6036G 57.00x33.00 (1448x838) Yes Yes 6.656 (169)
N4302412 14/14 30.00x24.00x12.00 (762x610x305) NP3024 NP3024G 27.00x21.00 (686x533) No No 5.813 (148)
N4363012 14/14 36.00x30.00x12.00 (914x762x305) NP3630 NP3630G 33.00x27.00 (838x686) No Yes 7.313 (186)
N4483612** 14/14 48.00x36.00x12.00 (1219x914x305) NP4836 NP4836G 45.00x33.00 (1143x838) Yes Yes —
N4363016** 14/14 36.00x30.00x16.00 (914x762x406) NP3630 NP3630G 33.00x27.00 (838x686) No Yes 7.313 (186)
N4483616** 14/14 48.00x36.00x16.00 (1219x914x406) NP4836 NP4836G 45.00x33.00 (1143x838) Yes Yes —
N4603616** 14/14 60.00x36.00x16.00 (1524x914x406) NP6036 NP6036G 57.00x33.00 (1448x838) Yes Yes 6.656 (169)
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
BACK PANEL
STIFFENER
CATALOG BODY/DOOR ENCLOSURE SIZE
CATALOG NUMBER*
BACK PANEL
E
NUMBER STEEL GAUGE H X W X D
WHITE “G”
SIZE A X B
DOOR BODY