Manual

J4
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
GENERAL ENCLOSURE ACCESSORIES
DRIP SHIELDS • HOLE SEALS
FEATURES-SPECIFICATIONS
DRIP SHIELDS
•
Designed to protect door hardware from dripping
water and settling dust
• Drip shields attach easily to the enclosure with stainless
steel screws, gasket and sealing washers (hardware
is furnished)
• Drip shields fit all single door NEMA 12 and NEMA 4
wall mounted enclosures
• Stainless steel door clamps are furnished to replace the
standard door clamps
• Steel drip shields have a ANSI 61 gray polyester pow-
der finish over phosphatized surfaces
• Stainless steel drip shields have a grained finish
• 42", 48", 60" and 72" drip shields fit floor mounted
double door enclosures. Specify when ordering for
double door wall mounted enclosures
CATALOG NUMBER
GAUGE
FITS ENCLOSURE
STEEL STAINLESS STEEL
WIDTH
DK12 SSDK12 14 12.00 (305)
DK16 SSDK16 14 16.00 (406)
DK20 SSDK20 14 20.00 (508)
DK24 SSDK24 14 24.00 (610)
DK30 SSDK30 14 30.00 (762)
DK36 SSDK36 14 36.00 (914)
DK42 — 14 42.00 (1067)
DK48 — 14 48.00 (1219)
DK60 — 14 60.00 (1524)
DK72 — 14 72.00 (1829)
DRIP SHIELDS
Drip Shields
HOLE SEALS
Designed to seal extra push-button holes, conduit
openings, and knockout openings from dirt, dust,
oil and water
Steel:
• Quick wing nut
• Oil resistant gasket
• ANSI 61 gray polyester powder
Stainless Steel:
• Quick wing nut
• Oil resistant gasket
• Grained finish
CATALOG NUMBER
DESCRIPTION
HOLE
STEEL STAINLESS STEEL
DIAMETER
WASPBG WASPBGSS
Miniature oil tight
pushbutton holes
0.88 (22)
WAS050 WAS050SS 1/2-inch conduit holes 0.88 (22)
WAS075 WAS075SS 3/4-inch conduit holes 1.13 (29)
WASPB WASPBSS
Standard oil-tight
pushbutton holes
1.20 (30)
WAS100 WAS100SS 1-inch conduit holes 1.38 (35)
WAS125 WAS125SS 1 1/4-inch conduit holes 1.63 (41)
WAS150 WAS150SS 1 1/2-inch conduit holes 2.00 (51)
WAS200 WAS200SS 2-inch conduit holes 2.50 (64)
WAS250 — 2 1/2-inch conduit holes 3.00 (76)
WAS300 — 3-inch conduit holes 3.63 (92)
WAS350 — 3 1/2-inch conduit holes 4.00 (102)
WAS400 — 4-inch conduit holes 4.63 (118)
HOLE SEALS
Hole Seals