Instruction Manual

WC12 SERIES CONSOLES
NEMA 12 OPERATOR INTERFACE
H8
FEATURES-SPECIFICATIONS
Applications
Designed
to hold electrical and electronic
controls and instruments. Pushbuttons,
pilot lights, meters, switches etc., can
be mounted on sloping control surfaces.
Interior components can be mounted
on standard back panel and terminal
straps. Heavy duty construction provides
protection from dirt, dust, oil and water.
Construction —Body
• Bodies and doors fabricated from
14 gauge steel
• Seams are continuously welded
and ground smooth
• 3-point keylocking handle is provid-
ed on front, main door
• Double overlapping doors are
provided on two door consoles
• Main hinged doors are flush
• Large sloping control panels are
hinged along the bottom edge
• Control panels have captivated screws
which thread into sealed wells
Industry Standards
UL 508, Types 12 & 13
CSA Certified, Type 12 & 13
NEMA/EEMAC Types 12 & 13
UL Files E64791
CSA File LL66078
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
• Grounding provisions provided
• Door stops provided to hold control
panel open
• Print pocket is provided
• Closed cell neoprene gasket is
provided
• Removable back panel included
with console
• Studs are welded to inside of
console for mounting back panel
• An inclined body rail is welded
to each side of 24.00" wide and
36.00" wide consoles for support
of terminal straps
Construction —Top
• Fabricated from 14 gauge steel
• Tops has a sloped front surface
• Seams are continuously welded
and ground smooth
• Instrument and access panels have
captivated screws which thread
into sealed well
CATALOG NUMBER CONSOLE
CATALOG NUMBER
BACK PANEL
CONSOLE ONLY WIDTH
CONSOLE TOP WRITING DESK CASKET KIT
SIZE H X W
WC1224B 24" (610) WC1224T WC1224W WC12C 32"x18" (813x457)
WC12B 36" (914) WC12T WC12W WC12C 32"x30" (813x762)
WC1248BD 48" (1219) WC1248T WC1248W WC12C 32"x42" (813x1067)
WC12 SERIES OPERATOR INTERFACE CONSOLES
• 4 holes are provided in bottom of
top for mounting to body
• Closed cell neoprene gasket
• Instrument panels and access pan-
els are removable
Construction— Writing Desk
• Fabricated from 14 gauge steel
• Seams are continuously welded
and ground smooth
• Desks are removable and attach
easily to console front
Finish
• ANSI 61 gray polyester powder
inside and out over phosphatized
surfaces
• Included back panel is white poly-
ester powder over phosphatized
surfaces
Access ories
• See pages J1-J22
WC1248BD