Instruction Manual

WC10 SERIES CONSOLES
NEMA 12 OPERATOR INTERFACE
H6
FEATURES-SPECIFICATIONS
Applications
Designed
to hold electrical and elec-
tronic controls and instruments. Push-
buttons, pilot lights, meters, switches
etc., can be mounted on sloping
control surfaces. Interior components
can be mounted on back panel and
terminal straps. Heavy-duty construc-
tion provides protection from dirt,
dust, oil and water.
Construction— Body
• Fabricated from 14 gauge steel
• Seams are continuously welded
and ground smooth
• 3-point keylocking handle is pro-
vided on front, main door
• Flush main door
• Control panels are hinged along
bottom edge
Industry Standards
UL 508, Types 12 & 13
CSA Certified, Type 12 & 13
NEMA/EEMAC Types 12 & 13
UL Files E64791
CSA File LL66078
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
• Controls panels have captivated
screws which thread into sealed wells
• Door stops provided to hold control
panel open
• Print pocket is provided
• Standard closed cell neoprene
gasket is provided
• Removable back panel is included
with enclosure
• Ground provisions provided
Construction— Top
• Fabricated from 14 gauge steel
• Seams are continuously welded
and ground smooth
• Instrument and access panels have
captivated screws which thread
into sealed wells
• Closed cell neoprene gasket
CATALOG NUMBER DESCRIPTION / SIZE
WC10B* Console body only / 24.00" wide
WC10T Top for WC10B
WC10W Writing desk for WC10B
WC10C Caster kit
WC10 SERIES OPERATOR INTERFACE CONSOLES
*U.L. Listed. Back panels are included with console.
NOTE: Tops, writing desks, and caster kits must be ordered separately.
Construction— Writing Desk
• Fabricated from 14 gauge steel
• Seams are continuously welded
and ground smooth
• Desks are removable and attach
easily to console front
Finish
• ANSI 61 gray polyester powder
inside and out over phosphatized
surfaces
• Included back panel is white poly-
ester powder over phosphatized
surfaces
Access ories
• See pages J1-J22
WC10B