Instruction Manual

WC9 SERIES CONSOLES
NEMA 12 OPERATOR INTERFACE
H4
FEATURES-SPECIFICATIONS
Applications
Designed
to house electrical and
electronic controls, instruments and
components. Heavy duty construction
provides protection from dirt, dust, oil
and water. Sloping front control panel
provides an ideal surface for mount-
ing pushbuttons, pilot lights, meters
and switches. Interior components
can be mounted on panels located
on the sides and back of the enclo-
sure. (Panels are optional)
Construction
Bodies and doors fabricated from
14 gauge steel
Industry Standards
UL 508, Types 12 & 13
CSA Certified, Type 12 & 13
NEMA/EEMAC Types 12 & 13
UL Files E64791
CSA File LL66078
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
Continuously welded seams ground
smooth, less knockouts or holes
3-point keylocking handle is provided
on front access door
Control panel attached with continuous
hinge along bottom edge and
secured with captive screws,
threaded into sealed wells
Door stops are provided to hold
control panel open
Collar studs provided for mounting
one, two or three optional panels
Closed cell neoprene gasket
Print pocket is provided
Grounding provisions provided
CATALOG BODY/DOOR
DESCRIPTION/SIZE
BACK PANEL BACK PANEL SIDE PANEL SIDE PANEL CASTER KIT
NUMBER STEEL GAUGE CATALOG NUMBER* SIZE H X W CATALOG NUMBER H X W CATALOG NUMBER
WC924B** 14/14
Console body only
NP3020
27.00x17.00
NP3020
27.00x17.00
WC10C
24" wide (686x432) (686x432)
WC936B 14/14
Console body only
NP3030
27.00x27.00
NP3020
27.00x17.00
WC10C
36" wide (686x686) (686x432)
WC9 SERIES OPERATOR INTERFACE CONSOLES
*Panels and Caster Kits must be ordered separately.
**UL Listed.
Finish
ANSI 61 gray polyester powder
inside and out over phosphatized
surfaces
Optional side and back panels
are white polyester powder over
phosphatized surfaces
Access ories
Side panels, back panels and
caster kits (reference tables)
See pages J1-J22
WC924B