Instruction Manual

PBYX SERIES 30.5MM PUSHBUTTON ENCLOSURES
NEMA 12 OPERATOR INTERFACE
H26
FEATURES-SPECIFICATIONS
Applications
Designed
to hold 30.5mm oil-tight
pushbuttons, switches, and pilot
lights with extra size to allow 2.50"
between centers of pushbutton holes.
Provide protection against dirt, dust,
oil, and water.
Construction
• Fabricated from 14 gauge steel
• Continuously welded seams ground
smooth
• Cover held in place by continuous
hinge
Industry Standards
UL 508, Types 12 & 13
CSACertified,Types12&13
NEMA/EEMAC Type 12 & 13
JIC EL-1-71
UL Files E64791
CSA File LL66078
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
CATALOG BODY/DOOR ENCLOSURE SIZE MOUNTING BACK PANEL SIZE
NUMBER STEEL GAUGE H X W X D C X E A X B
FG
PBYX4S 14/14
8.50x7.50x6.00 9.00x6.50 6.50x5.50 7.25 4.78
(216x191x152) (229x165) (165x140) (184) (121)
PBYX6 14/14
11.00x7.50x6.00 11.50x6.50 9.00x5.50 7.25 4.78
(279x191x152) (292x165) (229x140) (184) (121)
PBYX9 14/14
11.00x10.00x6.00 11.50x9.00 9.00x8.00 9.75 4.78
(279x254x152) (292x229) (229x203) (248) (121)
PBYX12 14/14
13.50x10.00x6.00 14.00x9.00 11.50x8.00 9.75 4.78
(343x254x152) (356x229) (292x203) (248) (121)
PBYX16 14/14
13.50x12.50x6.00 14.00x11.50 11.50x10.50 12.25 4.78
(343x318x152) (356x292) (292x267) (311) (121)
PBYX20 14/14
16.00x12.50x6.00 16.50x11.50 14.00x10.50 12.25 4.78
(406x318x152) (419x292) (356x267) (311) (121)
PBYX25 14/14
16.00x15.00x6.00 16.50x14.00 14.00x13.00 14.75 4.78
(406x381x152) (419x356) (356x330) (375) (121)
PBYX30 14/14
18.50x15.00x6.00 19.00x14.00 16.50x13.00 14.75 4.78
(470x381x152) (483x356) (419x330) (375) (121)
PBYX36 14/14
18.50x17.50x6.00 19.00x16.50 16.50x15.50 17.25 4.78
(470x445x152) (483x419) (419x394) (438) (121)
PBYX42 14/14
21.00x17.50x6.00 21.50x16.50 19.00x15.50 17.25 4.78
(533x445x152) (546x419) (483x394) (438) (121)
PBYX SERIES OPERATOR INTERFACE 30.5MM PUSHBUTTON ENCLOSURES
*Back panels included with enclosure.
PBYX12
• Back panel included with enclosure
• Closed cell oil resistant neoprene
gasket
• External mounting plates, top and
bottom of enclosure
• Captivated cover screws thread
into sealed wells
• Standard “4-way” pushbutton holes
accept all brands of oil-tight push
buttons, switches and pilot lights
• Grounding provisions provided
Finish
• ANSI-61 gray polyester powder
inside and out over phosphatized
surfaces
• Included back panels are white
polyester powder over phospha-
tized surfaces
Access ories
• See pages J1-J22