Instruction Manual

PSL SERIES 30.5MM PUSHBUTTON ENCLOSURES
NEMA 12 OPERATOR INTERFACE
H24
FEATURES-SPECIFICATIONS
Applications
Designed
to hold all standard brands of
pushbuttons, switches and pilot lights.
Provides protection from dust, dirt, oil
and water. This “Slimline” model is
designed for conditions where enclo-
sures must fit within very limited areas.
Construction
• Fabricated from 14 gauge steel
• Continuously welded seams ground
smooth
Industry Standards
UL 508, Types 12 & 13
CSACertified,Types12&13
NEMA/EEMAC Type 12 & 13
JIC EL-1-71
UL Files E64791
CSA File LL66078
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
CATALOG BODY/DOOR ENCLOSURE SIZE MOUNTING OVERALL
NUMBER STEEL GAUGE H X W X D C X E L X M
FI
PSL1 14/14
4.00x2.50x2.50 1.63x4.50 5.00x2.81 2.25 2.09
(102x64x64) (41x114) (127x71) (57) (53)
PSL2 14/14
6.25x2.50x2.50 1.63x6.75 7.25x2.81 2.25 2.09
(159x64x64) (41x171) (184x71) (57) (53)
PSL3 14/14
8.50x2.50x2.50 1.63x9.00 9.50x2.81 2.25 2.09
(216x64x64) (41x229) (241x71) (57) (53)
PSL4 14/14
10.75x2.50x2.50 1.63x11.25 11.75x2.81 2.25 2.09
(273x64x64) (41x286) (298x71) (57) (53)
PSL SERIES OPERATOR INTERFACE 30.5MM PUSHBUTTON ENCLOSURES
PSL4
• Closed cell oil resistant neoprene
gasket
• External mounting plates, top and
bottom of enclosure
• Captivated cover screws thread
into sealed wells
• Standard 4-way pushbutton holes
accept all brands of oil-tight push-
buttons, switches and pilot lights
• Grounding provisions provided
Finish
• ANSI-61 gray polyester powder
inside and out over phosphatized
surfaces
Access ories
• See pages J1-J22