Instruction Manual

W1C SERIES CONSOLES
NEMA 12 OPERATOR INTERFACE
H2
FEATURES-SPECIFICATIONS
Applications
Designed
to house electrical and
electronic controls and instruments.
Pushbuttons, pilot lights, meters,
switches etc., can be mounted on
sloping control surfaces. Interior
components can be mounted on
standard back panel. Heavy duty
construction provides protection from
dirt, dust, oil and water.
Construction
• Bodies and doors fabricated from
14 gauge steel
• Seams are continuously welded
and ground smooth without knock-
outs, holes, or cutouts
Industry Standards
UL 508, Types 12 & 13
CSA Certified, Type 12 & 13
NEMA/EEMAC Types 12 & 13
UL Files E64791
CSA File LL66078
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
• 3-point keylocking handle is provided
on front, main door
• Main door on console is raised
• Control panels are hinged along
bottom edge
• Controls panels, access panels and
instrument panels have captivated
screws which thread into sealed wells
• Door stops provided to hold control
panel open
• Print pocket is provided
• Grounding provisions provided
• Closed cell neoprene gasket
• Removable back panel included
with enclosure
CATALOG NUMBER ENCLOSURE SIZE H X W X D BACK PANEL SIZE H X W*
W1C24
40.00x24.00x20.00 30.00x21.00
(1016x610x508) (762x533)
W1C30
40.00x30.00x20.00 30.00x27.00
(1016x762x508) (762x686)
W1C36
40.00x36.00x20.00 30.00x33.00
(1016x914x508) (762x838)
W1C42**
40.00x42.00x20.00 30.00x39.00
(1016x1067x508) (762x991)
W1C48**
40.00x48.00x20.00 30.00x45.00
(1016x1219x508) (762x1143)
W1C SERIES OPERATOR INTERFACE CONSOLES
Writing Desk
• Fabricated from 14 gauge steel
• Seams are continuously welded
and ground smooth
• Desks are removable and attach
easily to console front
• Desks must be ordered separately
Finish
• ANSI 61 gray polyester powder
inside and out over phosphatized
surfaces
• Included back panel is white polyester
powder over phosphatized surfaces
Access ories
• See pages J1-J22
W1C30
* Back panel included with enclosure.
** Two Door Units