Instruction Manual

• External mounting plates, top and
bottom of enclosure
• Captivated cover screws thread
into sealed wells
• Standard “4-way” pushbuttons holes
accept all brands of oil-tight push
buttons, switches and pilot lights
• Enclosures 9.50" x 6.25" x 3.00"
and larger have internal detachable
hinges to hold cover open during
wiring, yet permit quick removal
DATA SUBJECT TO CHANGE WITHOUT NOTICE
PB SERIES 30.5MM PUSHBUTTON ENCLOSURES
NEMA 4 & 12 OPERATOR INTERFACE
H18
FEATURES-SPECIFICATIONS
Applications
Designed
to hold all standard brands
of pushbuttons, switches and pilot
lights. Provide protection from dust,
dirt, oil and water.
Construction
• Bodies and doors fabricated from
14 gauge steel
• Continuously welded seams ground
smooth
• Closed cell oil resistant neoprene gasket
Industry Standards
UL 508, Types 4, 12 & 13
CSACertified,Types12&13
NEMA/EEMAC Type 4, 12 & 13
JIC EL-1-71
(PB16 & PB25 meet N12 only)
UL File E64791
CSA File LL66078
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
BLANK COVER
CATALOG
ENCLOSURE
BODY/DOOR ENCLOSURE SIZE MOUNTING OVERALL
FI AB
NUMBER
CATALOG NO.
STEELGAUGE HXWXD CXE LXM
PB1 PB1BC 14/14
3.50x3.25x2.81 4.00x2.38 4.50x3.56 3.00 2.41 1.78 1.88
(89x83x71) (102x60) (114x90) (76) (61) (45) (48)
PB2 PB2BC 14/14
5.75x3.25x2.81 6.25x2.38 6.75x3.56 3.00 2.41 1.78 1.88
(146x83x71) (159x60) (171x90) (76) (61) (45) (48)
PB3 PB3BC 14/14
8.00x3.25x2.81 8.50x2.38 9.00x3.56 3.00 2.41 1.78 1.88
(203x83x71) (216x60) (229x90) (76) (61) (45) (48)
PB4 PB4BC 14/14
10.25x3.25x2.81 10.75x2.38 11.25x3.56 3.00 2.41 1.78 1.88
(260x83x71) (273x60) (286x90) (76) (61) (45) (48)
PB4S PB4SBC 14/14
7.25x6.25x3.09 7.75x5.38 8.25x6.56 6.00 2.69 2.16 2.63
(184x159x79) (197x137) (210x167) (152) (68) (55) (67)
PB5 PB5BC 14/14
12.50x3.25x2.81 13.00x2.38 13.50x3.56 3.00 2.41 1.78 1.88
(318x83x71) (330x60) (343x90) (76) (61) (45) (48)
PB6 PB6BC 14/14
9.50x6.25x3.09 10.00x5.38 10.50x6.56 6.00 2.69 2.16 2.63
(241x159x79) (254x137) (267x167) (152) (68) (55) (67)
PB6VL PB6VLBC 14/14
14.75x3.25x2.81 15.25x2.38 15.75x3.56 3.00 2.41 1.78 1.88
(375x83x71) (387x60) (400x90) (76) (61) (45) (48)
PB8 PB8BC 14/14
20.25x3.25x2.81 20.75x2.38 21.25x3.56 3.00 2.41 1.78 1.88
(514x83x71) (527x60) (540x90) (76) (61) (45) (48)
PB9 PB9BC 14/14
9.50x8.50x3.09 10.00x7.63 10.50x8.81 8.25 2.69 2.16 2.63
(241x216x79) (254x194) (267x224) (210) (68) (55) (67)
PB10 PB10BC 14/14
24.75x3.25x2.81 25.25x2.38 25.75x3.56 3.00 2.41 1.78 1.88
(629x83x71) (641x60) (654x90) (76) (61) (45) (48)
PB12 PB12BC 14/14
11.75x8.50x3.09 12.25x7.63 12.75x8.81 8.25 2.69 2.16 2.63
(298x216x79) (311x194) (324x224) (210) (68) (55) (67)
PB16** PB16BC** 14/14
11.75x10.75x3.09 12.25x9.88 12.75x11.06 10.50 2.69 2.16 2.63
(298x273x79) (311x251) (324x281) (267) (68) (55) (67)
PB25** PB25BC** 14/14
14.00x13.00x3.09 14.50x12.13 15.00x13.31 12.75 2.69 2.16 2.63
(356x330x79) (368x308) (381x338) (324) (68) (55) (67)
PB SERIES OPERATOR INTERFACE 30.5MM PUSHBUTTON ENCLOSURES
PB4 PB3BC
• Grounding provisions provided
Finish
• ANSI-61 gray polyester powder inside
and out over phosphatized surfaces
Access ories
• See page E2 for stainless steel
PB-SS Series
• PBBC Series, blank covers-no
holes (reference tables)
• For accessories, see pages J1-J22
** Only meets N12.