User Manual
JIC SERIES NON-METALLIC ENCLOSURES
OPAQUE, HINGED COVER WITH TWO SCREWS
E63
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
FEATURES-SPECIFICATIONS
Construction
• Hot compression molded fiberglass
reinforced thermoset polyester
• Poured polyurethane seamless
gasket provides watertight, dust-
tight environmental seal
• Recessed pan head screws –
no protruding surfaces
• 300 Series stainless steel used on
all external hardware
• Rounded edges, minimal protru-
sions or exposed pocket area for
accumulation of dust or debris
Industry Standards
• UL/cUL 50/508, Types 1, 3, 3S, 12, 13, 4x
• CSA Standard C22.2 Types 1, 3, 3S, 12, 13, 4x
• NEMA Standard 250 Types 1, 3, 3S, 12, 13, 4x
• IEC 60529 IP66
• UL94 V-0, 5V flammabilit y rating
• Non-flame propagating
• Flame Spread classification per NFPA
No. 101, Class A (1)
• Temperature Range: -40°F to 250°F
(-40°C to 120°C)
• Molded in flange for easy mounting
• Panel mounting capability for fixed
rear panel
• Raised bosses with brass inserts
accepting 10-32 screws for optional
panel mounting
• Workable material cuts, drills,
punches and saws with ease and
accuracy
• Submersible, non-corrosive environ-
mental design
• Full length stainless steel hinged
cover
• Full 180° door opening
• Non-conductive, impact resistant,
UV resistant
• Smooth surface, no color variations,
swirls or color pockets, no voids
• Color: Gray
Access ories
• See pages E77-E79
HW-J100804CHSC
PART NUMBER
ENCLOSURE OVERALL
SIZE HxWxD
ENCLOSURE INSIDE
AxBxC
WT.
CARBON STEEL
SUBPANEL
FIBERGLASS
SUBPANEL
STAINLESS
STEEL SUBPANEL
ALUMINUM
SUBPANEL
JIC SERIES WITH OPAQUE, HINGED, TWO-SCREW COVER
Note: Subpanels must be ordered separately. Dimensions in inches (millimeters).
*Note: In crowned cover units, the center of the cover is raised 3/4". Crowned cover is available only in 10x8x5 size enclosure.
HW-J60404CHSC
7.50 x 5.43 x 4.75
(191 x 138 x 121)
5.84 x 3.85 x 4.45
(148 x 98 x 113)
2.5 lbs. HW-MP604CS HW-MP604FG HW-MP604SS HW-MP604A
HW-J60604CHSC
7.50 x 7.50 x 4.75
(191 x 191 x 121)
5.72 x 5.72 x 4.45
(145x145x113)
2.75 lbs. HW-MP606CS HW-MP606FG HW-MP606SS HW-MP606A
HW-J80604CHSC
9.62 x 7.50 x 4.74
(244 x 191 x 121)
7.73 x 5.74 x 4.45
(196x146x113)
3.5 lbs. HW-MP806CS HW-MP806FG HW-MP806SS HW-MP806A
HW-J100804CHSC
11.62 x 9.41 x 4.25
(295 x 239 x 108)
9.73 x 7.73 x 3.98
(247x196x101)
5 lbs. HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J100805CHSC
(crowned cover)*
11.62 x 9.37 x 5.06
(295 x 238 x 129)
9.73 x 7.73 x 4.83
(247 x 196 x 123)
5 lbs. HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J121005CHSC
13.56 x 11.43 x 5.21
(344 x 291 x 132)
11.79 x 9.80 x 4.94
(299 x 249 x 125)
6.5 lbs. HW-MP1210CS HW-MP1210FG HW-MP1210SS HW-MP1210A
HW-J141206CHSC
15.50 x 13.50 x 6.25
(394 x 343 x 159)
13.53 x 11.55 x 5.94
(344 x 293 x 151)
8.5 lbs. HW-MP1412CS HW-MP1412FG HW-MP1412SS HW-MP1412A
HW-J161406CHSC
17.53 x 15.46 x 6.23
(445 x 393 x 158)
15.63 x 13.60 x 5.94
(397 x 345 x 151)
11.5 lbs. HW-MP1614CS HW-MP1614FG HW-MP1614SS HW-MP1614A
HW-J181608CHSC
19.62 x 17.61 x 8.82
(498 x 447 x 224)
17.69 x 15.69 x 8.45
(449 x 399 x 215)
19.25 lbs. HW-MP1816CS HW-MP1816FG HW-MP1816SS HW-MP1816A
HW-J201608CHSC
22.00 x 17.68 x 8.83
(559 x 449 x 224)
19.72 x 15.72 x 8.45
(501 x 399 x 215)
20.25 lbs. HW-MP2016CS HW-MP2016FG HW-MP2016SS HW-MP2016A
UL File E64791 CSA File 222873